Item: 1/8 big feet 4WD rc car model monster truck nitro

wholesale 1/8 rc car model from China rc hobby shop,big feet monster truck, nitro 4WD rc drift car

Description: big feet nitro rc monster truck

AM27 transmitter with LED Screen, 1100ham battery

Speed: 80-90 KM / hour

Play time: 15 minutes

Engine level: 28cxp

 

1pc / carton

Item size: 54*48*3cm

Carton size: 62*48*34cm

Packing size: 63*49*35cm

G.W/N.W: 10.7/9.0kg

Specification:

• 1/8 Scale Nitro 4WD drifting car model,Monster Racing Truck
• GMS .28 Big Block
• 2 Speed Automatic Gearbox with ALL Metal Gears
• Reverse Gear operated by 3 Channel Transmitter (included)
• Manual Select High and Low Range
• 3 Channel Pistol Grip Radio Factory Installed
• 4 Servos including 2 Metal Geared High Torque Steering Servos
• Portable Electric Rotor Starter and NiCad Battery
• 1100mah NiCad 6 Volt Rechargeable Receiver Battery
• NiCad Battery Charger
• Tough Countersunk Anodized Dual Level Aluminium Chassis with Polycarbonate Bracing
• High Volume Element Air Cleaner
• Anodized Aluminium Fuel Filter
• Race Tuned Exhaust
• Adjustable Ride Height
• Adjustable Down Stops Front and Rear
• 100% Fully Assembled
• 4 Wheel Drive drifting rc car
• Front and Rear Ball Raced Viscous Differentials with Metal Bevel Gears
• Oversize Pressurised Fuel Tank
• Full 4 Wheel A-Arm 100% independent Adjustable Suspension
• Double Wishbones
• Factory Glued Tyres with Inserts on Dish Style Racing Wheels
• Oversized Race Aluminium Oil Filled Adjustable Shock Absorbers
• Adjustable Toe In, Toe Out
• Powerful Twin Disc Braking with Replaceable Pads
• Factory Installed Servo Savers
• Chassis Type: Twin Plate Braced Anodized Aluminium

Suspension: Four wheel independent double wishbone system 

 

Function:

 

Go forward&reverse, turn left&right,4x4 full time drifting.

 

Dimensions of rc vehicle model:

• Overall Length: 535mm
• Overall Width: 460mm
• Wheelbase: 365mm
• Height: 285mm
• Track 345mm
• Ground Clearance 90mm
• Tire Width/Diameter 175 x 107 mm
• Weight 3900g
• Body: Polycarbonate  

Packing:

-HL Lightning Brushless Version 1/8 rc car model monster truck

-3 Channel LCD screen Computerized Radio Transmitter
-User Manuals.
-7.2V,1100mAh battery
 

1pc / carton

Item size: 54*48*3cm

Carton size: 62*48*34cm

Packing size: 63*49*35cm

G.W/N.W: 10.7/9.0kg

 

Features:

1) the process of cleaning before driving your car: For cleaning the engine,1-2 tank oil's use is a standard, and then run your car slowly to run out of another 1-2 tank oil, all ways down, the cleaning work is over, the car can run normally

2) turning on the transmitter and the receiver: Extend the antenna of the transmitter and the receiver, and then switch on the transmitter and the receiver in succession;

While switching on the receiver, make sure the carburetor is at the neutral position

3) fill the fuel: Fill the special model's fuel, and mix the gas and the lubricating oil, the rate of the gas to the lubricating oil is 25:1; close the fuel tank's cover and fasten it after it after filling the fuel

4) starting the engine: Push the front valve several times until securely streaming out oil; shut down the wind gate, and turn the accelerograph to the position that

Spaces 1/4-1/3 place of opening; pull the pulling-start rod until engine send out sound of start to start engine adjust the wind gate to the place which spaces 1/4 position of opening position; pull the pulling-started rod quickly; start engine several minutes to pre-warm

5) stop the engine: The engine will immediately stop running as long as you press the stall switch of the engine, please refer to the instruction manual(g230 rc) for more details

6) 2-channel transmitter system: The servo must be set at the center position before installation, to set the neutral turn on the transmitter and receiver, set the trim tabs in the center position, and turn off the receiver and transmitter in succession, the

Servo will be in the proper neutral position for installation.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below: